|
Product Details:
|
| Alloy: | 1100 | Temper: | O/H22/H24/H26 |
|---|---|---|---|
| Thickness: | 0.08-0.2mm | Width: | 60-1440mm |
| I.D: | 75/150/200/300/400mm | O.D: | 400-1400mm |
| High Light: | colored aluminum foil,aluminum foil containers |
||
1 , Products : Aluminum bare foil
2 , Alloy : 1000 series , 3000 Series , 8000 series
3 , Aluminum Thickness (mm) : 0.08 ~ 0.2 mm
4 , Temper : O,H22, H24 , H26
5 , Width : 60-1440mm
6 , Coil wight : < / = 5000 kg
7 , I D : 75/150/200/300/400
Remarks : 1 . The alloy , temper & size can be negotiated by buyer and seller
2 , Width can be 50 ~ 800mm as per customer's requirement.
| Inspection items | Coating Types | |||
| PVDF | PE | Ceiling Top Lacquer | ||
| No natural clear lacquer | With natural clear lacquer | |||
| Coating Thickness | 26 + /-1 | 18 + / - 1 | 20 + / - 1 | |
| Glossy Tolerance | 60O glossy value ≥ 80 unit , tolerance + / - 10 unit | glossy value ≥ 80 unit , tolerance + / - 10unit | ||
| 60O glossy value ≥ 20 ~ 80 unit , tolerance + / - 7 unit | glossy value≥20 ~ 80 unit , tolerance + / - 7 unit | |||
| 60O glossy value >20 unit , tolerance + / - 5unit | 60O glossy value >20 unit , tolerance + / - 5unit | |||
| Pencil Hardness | ≥ IH | ≥ 2H | ≥2H | |
| Flexible | ≤2T | ≤3T | ≤2T | |
| Impact Resistance | No failing , No crack | No failing , No crack | ||
| Adhesive Quality | 0 grade and 1 grade | 0 grade and 1 grade | ||
| Acid Resistance | No Change | Coating no change | ||
| Alkalistability | No change | - | ||
| Solventresistance | Bottom not appearance after 100 times | Bottom not appearance after 100 times | Bottom not appearance after 100 times | Bottom not appearance after 100 times |
| Color Difference | The coating color is almost same as confirmed by buyer and seller , the color difference tested by colorimeter between single coating and sample is less tan 1.2 , same lot products color difference | |||
| Alloy Code | temper |
Tensile Strength Rm(MPa) |
Yield Strength Rp0.2(Mpa) |
Extend Ratio A50(%) |
| TR-010,TR-020,TR-030,TR-040,TR-050,TR-110,TR-310,TR-116,TR-316,TR-111,TR-313,TR-121,TR-131,TR-141,TR-150,TR-151,TR-156 Etc. | O | 95-135* | ≥35* | ≥15* |
| H14 | 140-185 | ≥125 | ≥1.5 | |
| H24 | 140-185 | ≥125 | ≥3.0 | |
| H16 | 185-225 | ≥160 | ≥1.0 | |
| H18 | ≥185 | - | ≥0.5 | |
| TR-166 Etc.tube material | H24 | 185-235 | ≥150 | ≥8 |
| TR-116,TR-316 Etc.tube material | H14 | 140-185 | ≥125 | ≥3 |
| H24 | 140-185 | ≥125 | ≥8 |
Remark:“*”in the above file means the tensile strength will be 120-150Mpa,yield strength will be ≥45Mpa,and elongation will be ≥20% if the material of TR-050,TR-150,TR-151,TR-156 etc. with temper O contain Cu..
Additional: We can produce special specification according to customer’s request.
as per international standard ASTM OR EN standard ,
all chemical composition ,mechanical property ,size tolerance ,flat tolerance ,etc strictly as per ASTM OR EN standard
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al | |
| Single | Total | ||||||||||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | _ | 0.05 | 0.03 | 0.03 | _ | ≥99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | _ | 0.05 | 0.03 | 0.03 | _ | ≥99.6 |
| 1100 | Si+Fe:0.95 | 0.05~0.40 | 0.05 | _ | _ | 0.1 | _ | 0.05 | 0.15 | ≥99 | |
| 1200 | Si+Fe:1.00 | 0.05 | 0.05 | _ | 0.1 | 0.05 | 0.05 | 0.15 | ≥99 | ||
| 8011 | 0.5~0.9 | 0.6~1.0 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | 0.08 | 0.05 | 0.15 | Remainder |
1. Since 1988, we have rich experience in this industry in China;
2. Good reputation in copper cable industry;
3. We have our own development department for new material research;
4. Good experience and cooperation with big client in the world;
5. With Certificate ISO9001-2008;
6. High performance cost ratio;
7. Fast delivery time;
8. Good communication skills, and good service and understandings for customers;.
1. Insulation shield for cable; It can be used for protecting the high frequency transmission of telecommunication cable; power cable and electric wire from the interference of electromagnetic and radio wave;
2. Copper foil are widely used for coaxial cable shield and electronic product like EHV cables and RF cables; shielding layer of many other kinds cables;telephone lines and ventilation ducts, etc;
3. Electromagnetic interference shielding;isolate electromagnetic waves to prevent damage to the human
4. Good insulativity and shielding effectiveness to reduce attenuation;avoid the voltage or current influence function;
5. Good thermal insulation; waterproof; cold resistance;Easy to peel; stick force resistance;
Contact Person: Cindy
Tel: +86 18021060306
Fax: 86-512-62538616
