180MPa H18 Bare Aluminium / Aluminum Foil Coating For Air Conditioner Production

8011 H18 0.160mm*600mm Bare Aluminum / Aluminium Coated Foil For Air Conditioner Production

Our mechanical property:

Commercial terms

Hydrophilic foil coating layer performance:

1, Film thickness / 1.0-2.0µm (Single side average thickness)

2, Hydrophilicity /Primary contact angle?10° /Continuous contact angle?20°

3, Adherence strength Erichsen test(pressed depth 5mm), no peeling off

4, Corrosion resistance /Salt&Spray (72 hours) R.N?9.5

5, Alkali resistance/ Dipped in 20% NaOH under 20°C for 3 minutes. absolutely no blister.

6, Impregnant resistance / Sample weight loss?1%

7, Heat resistance/ Under 200°C keep 5 minutes, performance and color unchanged; Under 300°C keep 5 minutes, coating film become a bit yellow

8, Oil proof/ Dipped in volatile oil for 24 hours, no blister on the coating layer

9, Coating film odor/ No stranger odor

10, Abrasion to mold / Same as ordinary aluminium foil

Our characteristics:

- High temperature resistant
- Weathering resistant
- Scrubbing resistant
- Sound insulation
- Acid or alkali proof
- Fireproof
- Light weight material is easy to construct and install
- Bright colors
- Easy molding process,not rusting etc.

Application:

1. Widely used in insulation board
2. Aluminum curtain wall
3. Aluminum-magnesium-manganese roofing system
4. Aluminum ceiling
5. Acp and many other areas

6. Lighting,

• Printing,
• Packing,
• Decorative,
• Electronics surface,
• Hot rolled thick plate,
• PS base plate,
• Aluminum plastic base plate,
• Aluminum curtain wall base plate,
• Aluminum composite panel base plate,
• Aluminum spacer,
• Aluminum embossed sheet,
• Aluminum tread plate

Mainly for finstock, air conditioner.

Pls feel free to contact us, either in English or Russian is OK.

Larisa