|
Product Details:
|
| Product Name: | Brazing Alloy Corrosion Of Aluminum In Liquid Cold Plates | Keyword: | Liquid Cold Plates |
|---|---|---|---|
| Type: | Water Cooling Plate | Grade: | 3000 Series |
| Coolant: | Water | Temper: | O,F,H111,H112 |
| Usage: | Electric Vehicle Battery | Structure: | Upper Plate & Lower Plate+flow Channel+connector |
| Pack: | Standard Exporting Package | Payment Term: | TT Or LC |
| High Light: | Brazing Alloy Aluminium Cooling Plate,H112 Temper Aluminium Cold Plate,Brazing Alloy Aluminium Cold Plate |
||
Brazing Alloy Corrosion Of Aluminum In Liquid Cold Plates
Brazing Alloy Corrosion Of Aluminum In Liquid Cold Plates are widely used for new energy cars battery . We can customize as your design . This aluminum cooling plate are suitable for prismatic batteries or soft battery package. If your battery is cylindrical cell, we also can supply the snake cooling tube . which is widely used for battery type 18650, 21700 and 46800.
| Name | Aluminium Liquid Cold Plate |
| Usage | electrical vehicles, energy storage system , heat exchanger |
| Dimension | As your request |
| Technical | Vacuum brazed cooling cold plate |
| Alloy | 1000.3000,5000 |
| Temper | O.H14,H16 H112etc. |
Chemical Composition
| No. | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1 | 1050 | ≤ 0.25 | ≤ 0.40 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | - | ≤ 0.05 | ≤ 0.05 | ≤ 0.03 |
| 2 | 1100 | ≤ 0.95(Fe+Si) | 0.05-0.20 | ≤ 0.05 | - | - | ≤ 0.10 | - | - | |
| 3 | 1197 | ≤ 0.15 | ≤ 0.20 | 0.40-0.55 | 0.10-0.20 | ≤ 0.03 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 |
| 4 | 3102 | ≤ 0.40 | ≤ 0.70 | ≤ 0.10 | 0.05-0.40 | - | - | ≤ 0.30 | - | ≤ 0.10 |
| 5 | 3R03 | ≤ 0.15 | ≤ 0.15 | ≤ 0.01 | 0.90-1.10 | ≤ 0.03 | ≤ 0.03 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 |
Advantage:
Trumony Aluminium Limited, We are a professional battery pack heat exchanger manufacturer.
FAQ :
Q: Are you a trading company or manufacturer?
A: Yes,we are a factory with more than 10 years to make the aluminium end plate for EV battery module.
Q: What is your terms of payment ?
A: Normally our payment is 30% TT in advance, balance paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new molds and free samples (within 5 kg),;after confirmation, 25-30 days for aluminium end plates mass production
Q: OEM/ODM available?
A: Yes,if you have your own design for the battery module aluminium end plate , it will support us to do .
Q: Could you provide sample?
A: Yes, We are willing to offer you extrued end plate samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
Contact Person: Mr. Tracy
Tel: +8613584862808
Fax: 86-512-62538616
