Friction Stir Welded Liquid Cooling Plate for High Power Battery Pack ESS Battery System

1. Product Overview

Our Liquid Cooling Plate is a core thermal management component specially designed for BESS (Battery Energy Storage System), industrial energy storage cabinets, and large-scale battery pack projects. Compared with traditional air cooling solutions, liquid cooling plates provide higher heat dissipation efficiency, lower temperature difference, lower noise, and longer battery cycle life.

We supply 0.5C and 1C full-rate customized liquid cooling plates to match different energy storage project requirements, perfectly adapting 200MWh / 500MWh / 1GWh large-scale ESS stations, commercial & industrial energy storage, and container energy storage systems.

2. Core Advantages (Buyer Focused)

• Ultra-low battery temperature difference ≤3°C Optimized internal parallel flow channel design ensures uniform coolant flow, effectively balancing the temperature of each battery cell. Avoids local overheating and inconsistent cell attenuation, greatly improving the overall battery pack service life.
• Strictly classified for 0.5C / 1C continuous discharge scenarios Many suppliers only provide universal cold plates. We professionally distinguish low-rate and high-rate versions: • 0.5C version: cost-effective, stable for conventional energy storage peak shaving & valley filling projects • 1C high-rate version: upgraded flow channel density, lower thermal resistance, can withstand 4× heat generation under high current, support long-term full-power 1C operation without over-temperature alarm
• Leak-proof & high pressure resistance Adopts vacuum brazing integral molding process, no welding gaps. Strict hydraulic pressure testing before delivery to eliminate liquid leakage risks, suitable for long-term 24/7 operation of energy storage power stations.
• High thermal conductivity aluminum alloy material Adopts 6063-T5 / 6061 high thermal conductivity aluminum, with fast heat conduction speed, stable structural strength, not easy to deform after long-term load.
• Full customization support Customizable size, thickness, flow channel layout, inlet & outlet interface position, surface insulation spraying, to perfectly match different battery modules (280Ah / 314Ah / 320Ah / 500Ah etc.)

3. Technical Specifications

4. Why 0.5C & 1C Must Be Separated (Professional Technical Explanation)

Battery heat generation follows I²R law. When operating from 0.5C to 1C, the current doubles, and the heat generation increases 4 times.

Ordinary 0.5C cold plates have sparse flow channels and high thermal resistance. If forced to run 1C continuous charging and discharging, it will cause:

• Excessive maximum cell temperature
• Module temperature difference over 5°C
• BMS frequent power limit
• Accelerated battery decay & hidden thermal runaway risk

Our 1C dedicated liquid cooling plate is structurally upgraded with denser flow channels and larger heat exchange area, which can safely carry high-rate heat load and ensure long-term stable operation of high-power energy storage projects.

5. Application Scope

• Large-scale grid-side BESS power station (100MWh / 200MWh / 500MWh / 1GWh)
• Container energy storage system
• Industrial & commercial peak shaving energy storage
• Micro-grid energy storage system
• High-power battery pack energy storage projects

6. Quality & Package

• 100% pressure tested before shipment to ensure zero leakage
• Full inspection of size, flatness and welding quality
• Independent foam + carton + wooden box packaging, anti-collision and anti-deformation
• Long-term after-sales technical support for project matching