iso9001 aluminum cooling plates
"
Thermal Conductivity Aluminum Vapor Chamber With Radious
Thermal Conductivity Aluminum Vapor Chamber With Radious Description Heat pipes and vapor chambers are often lumped into liquid cooling, but, they are not actually cooling they are in fact moving heat from a hot location to another location where it is dissipated. Product Item:60mm Width 3mm Thickness Aluminum Vapor Chamber Flat For Power LED CPU Heat Pipe Material:Aluminum Length:100mm,110mm,120mm,130mm,140mm,etc. Width:60mm Thickness:3mm Wick Structure:Groove Apply to CPU
3003 EV Battery cell Cooling Use Water Cooling Aluminum Plate
EV Battery Cooling Use Water Cooling Aluminum Plate 1. Description of production: Cold stamping - cleaning - spray flux - fixture clamp the product into the brazing furnace - brazing furnace after more than a dozen procedures (automatic heating/insulation/cooling/welding, etc.) - do full inspection of air tightness test - cleaning (mainly for welding cleaning, polishing, drying), a total of more than 20 process. 1) Cladding Material: Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0
Alloy 4004 / 3003 / 4004 Aluminum Heat Transfer Plates For Cooling System
Alloy 4004/3003/4004 Temper HO Aluminum Heat Transfer Plates For Cooling System Core Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 3003 0.6 0.7 0.05-0.20 1.0-1.5 0.1 0.05 0.03 1 Cladding Material Alloy Si Fe Cu Mn Mg Zn Zr Ti code 4004 9.0 - 11.0 0.8 0.30 0.05 1.0 - 2.0 0.20 0.20 1 Produce capability Width(mm) Thickness(mm) Length(mm) Inside Diameters(mm) Sheet 500-1070 0.5-5.0 500-2500 As customer request Our advantage 1. Since 1988, we have rich experience in this
Extruded 3003 Aluminum Serpentine Tube For Sustainable Energy Power Generation
Extruded 3003 Aluminum Serpentine Tubes for Sustainable Energy Power Generation 1. Product Introduction: We supply serpentine extruded tubes in different alloys, such as 1 series,3 series,6 series and so on. For 3 series alloy,it has good anti-corrosion property ,For 6 series alloy,it has good strength advantage.And we can manufacture in different shapes, like flat,snake shape and so on.These are used for different batteries cooling in new energy vehicles, normally Cylindrica
ESS 1P52S Aluminum Battery Lower Enclosure For Stored Energy Battery Pack
Product Overview This ESS 1P52S aluminum battery lower enclosure is a liquidcooled structure designed for stored energy battery packs, constructed with highstrength aluminum alloy and optimized for 1P52S configurations. It features efficient liquid cooling channels to deliver reliable structural support and stable thermal management for largecapacity energy storage systems. It is widely applied in industrial & commercial energy storage, gridscale energy storage, renewable
Custom Stamped Brazed Liquid Cold Plate for Electric Vehicle Battery Packs with Excellent Heat Dissipation
Product name:Reliable Brazed Aluminum Liquid Cold Plate for EV & HEV Power Battery Systems Products introduction: Our liquid cold plate is a high-reliability thermal management solution specially engineered for energy storage (ESS) systems. Designed to address the thermal challenges of large-capacity energy storage battery modules, it delivers efficient, uniform cooling to maintain optimal operating temperatures, eliminate hotspots, and protect battery cells from overheating
587 Cell Stamped Brazed Liquid Cold Plate For Energy Storage System Battery Heat Dissipation
Product Details Place of Origin China Brand Name Trumony Certification ISO9001, IATF16949 Model Number RR-051905 Core Process Continues Brazing, Stamping Shape Customized Warranty 10 Year Surface Treatment Epoxy Coating Product Overview Introduction: Our 587 Cell Stamped Brazed Liquid Cold Plate is a proven thermal management solution specifically developed for heat dissipation in energy storage system (ESS) battery racks. It employs a reliable manufacturing process that
Vehicle Heat Exchanger 3003 CNC Cooling Fin Extruded Aluminum Heat Sink
3003 CNC Extruded Aluminum Heat Sink Cooling Fin for heat exchanger of vehicle Company Introduction: Trumony Alumnum Co.LTD build from 2006, have export over 53 countries of worldwide. We are widely engaged in transportation, heat exchanger, cable, packaging, construction, electronics, environmental protection and other fields. Apart from our current production,we are also actively developing new aluminum materials and searching for customers solutions which is best suited
White Aluminum Single Entry Roll Bond Evaporator For Home Appliance
Home Appliance White Aluminum Single Entry Roll Bond Evaporator Roll bond evaporator, aluminum evaporator, fridge evaporator, double size roll bond evaporator also can using on Solar panels Products:381X229mm Aluminium Roll bond evaporator in refrigerator Main use: Used in freezer, refrigerator, wine cabinet, showcase chiller etc. Good quality, service and moderate price in the same field Powerful production ability, quick delivery! Alloy State: 3003 or according to customers
