Aluminum Alloy Sheet
Silver Hot Rolling Aluminum Sheet For Military Shelter , 5052/3003/3004
Three Advantages of Military Shelter Aluminum Sheet: 1,Large size:Max.width reaches 2650mm and the length ≥ 10000mm 2,High Uniformity:annealed by continuous heat treatment line, and the properties differences of the same coil and between coils are small 3,Precise dimension and excellent flatness: dimension and flatness meet EN/ASTM standard. Applications: suitable for proof and side wall of Military Shelter. Alloy states: 5052,3003,3004 Specification: 1.Roof Plate Alloy
Trailer Use Thin Aluminum Sheet , Aluminium Sheet 3mm Mill Finish Surface Treatment
Trailer Use Thin Aluminum Sheet , Aluminium Sheet 3mm Mill Finish Surface Treatment 3003,3004,5052 Aluminum alloy wide sheet products suitable for proof and side wall of Van Trailer. Max Width:2650mm Length≥10000mm Three Advantages of Trailer Aluminum Sheet: 1,Large size:Max.width reaches 2650mm and the length ≥ 10000mm 2,High Uniformity:annealed by continuous heat treatment line, and the properties differences of the same coil and between coils are small 3,Precise dimension
Width 1500max 1000 series Plain Aluminum Sheet used for Construction
production standard : as per international standard ASTM OR EN standard , all chemical composition ,mechanical property ,size tolerance ,flat tolerance ,etc strictly as per ASTM OR EN standard Alloy Si Fe Cu Mn Mg Cr Zn Ti Other Al Single Total 1050 0.25 0.4 0.05 0.05 0.05 _ 0.05 0.03 0.03 _ ≥99.5 1060 0.25 0.35 0.05 0.03 0.03 _ 0.05 0.03 0.03 _ ≥99.6 1100 Si+Fe:0.95 0.05~0.40 0.05 _ _ 0.1 _ 0.05 0.15 ≥99 1200 Si+Fe:1.00 0.05 0.05 _ 0.1 0.05 0.05 0.15 ≥99 3003 0.6 0.7 0.05~0
1050 / 3003 Circle Shape Reflective Aluminum Disc For Pedestrian Traffic Sign
1050 / 3003 Circle Shape Reflective Aluminum Pedestrian Traffic Sign Aluminium Circle: Available aluminium alloy 1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. Thickness range 0.5-8.0mm Width range 100-1000mm Temper O, H12, H22, H14, H24, H16, H26, etc. Hot rolled and cold rolled both available Surface: Bright silver, mill finished Chemical Composition (WT. %) ALLOY Min. Al Si Fe Cu Mn Mg Zn V Ti Other 1050 99.5 0.25 0.4 0.05 0.05 0
H24 Economical Aluminium Circles Traffic Signs / Road Sign Alloy 1060 1050
1060 / 1050 H24 Economical Aluminium Circles Traffic Signs or Road Sign Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Alloy: 1050, 1060, 1100, 3003 Temper: O, H22, H14, H16 Thickness: 0.5-8.0mm Diameter: 100-1000mm Surface Treatment: Mill Finish MOQ: 5MT per Size Leadtime: 15-30 Days Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Product Range: 1) Product Specifications:
Hot Rolled Half Hard Aluminum Circle 1060 / 1050 H24 Aluminium Disc Lower Intensity
Hot Rolled 1060 / 1050 H24 Half Hard Aluminum Circle Traffic Sign Use Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Alloy: 1050, 1060, 1100, 3003 Temper: O, H22, H14, H16 Thickness: 0.5-8.0mm Diameter: 100-1000mm Surface Treatment: Mill Finish MOQ: 5MT per Size Leadtime: 15-30 Days Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Product Range: 1) Product Specifications:
Reflective Aluminum Circle Sheet O Temper 1050 / 1100 / 3003 Road Safety Sign
Reflective Circle Aluminum Traffic Sign for Road Safety Sign 1050 / 1100 / 3003 Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium Circle Alloy: 1050, 1060, 1070, 1100, 3003 Temper: O, H22, H14, H16 Thickness: 0.50~8.0mm Diameter: 100~1000mm Product Range: 1) Product Specifications: Product Name Alloy Purity Hardness Specifications(mm) Thickness Diameter Aluminum Circle 1050 1060 3003 96.95-99.70% O,H12,H14
Silver Smooth 1050 H34 Aluminium Circle / Aluminium Disc for Highway Road
1050 / 3003 Aluminum Road Sign / Aluminum Traffic Sign for Highway Road Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium Circle Alloy: 1050, 1060, 1070, 1100, 3003 Temper: O, H22, H14, H16 Thickness: 0.50~8.0mm Diameter: 100~1000mm Product Range: 1) Product Specifications: Product Name Alloy Purity Hardness Specifications(mm) Thickness Diameter Aluminum Circle 1050 1060 3003 96.95-99.70% O,H12,H14 0.5-6
Coating / Printing Aluminum Circle 1100 1050 1060 3003 For Aluminum Cookwares
Aluminum Circle / Disc 1100 1050 1060 3003 for Aluminum Cookwares / Road Signs Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. 3003 Aluminum Circle Specification Product 3003 aluminum circle Alloy 3003,3004,3005,3105 Temper H12,H18,H14,H16,H22,H24,H26 Thickness 0.5-8.0mm Diameter 100-1000mm Color Silver, or as per customer’s requirement Application The product is widely used in Reflector, Traffic sign. Deeply
Good Flatness Aluminium Circle Traffic Sign 0.5 - 8.0mm Thick Aluminum Wafer
1050 / 1100 / 3003 Good Flatness Aluminium Circle for Traffic Sign / Road Sign Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium Circle: Available aluminium alloy 1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. Thickness range 0.5-8.0mm Width range 100-1000mm Temper O, H12, H22, H14, H24, H16, H26, etc. Hot rolled and cold rolled both available Surface: Bright
Bulletin Aluminium Circle 3003 1060 Corrosion Resistance Continuous Casting
Aluminum Disc for Road Sign / Traffic Sign / Bulletin 1050 / 1100 / 3003-O Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium Circle: Available aluminium alloy 1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. Thickness range 0.5-8.0mm Width range 100-1000mm Temper O, H12, H22, H14, H24, H16, H26, etc. Hot rolled and cold rolled both available Surface: Bright silver,
Mill Finished Aluminum Circle 100 - 1000mm Diameter For Signage / Lamp Post
Aluminum Circle Signage / Lamp Post / Road Sign / Thin Plate 1050 / 1100 / 3003-O Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium Circle: Available aluminium alloy 1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. Thickness range 0.5-8.0mm Width range 100-1000mm Temper O, H12, H22, H14, H24, H16, H26, etc. Hot rolled and cold rolled both available Surface: Bright
Round Piece Aluminum Circle Sheet For Cookware / Traffic Sign 1050 1100 3003 O
Aluminum Circle Sheet / Round Piece For Cookware / Traffic Sign 1050 / 1100 / 3003-O Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium circle: 1) Alloy: 1050/1060/1070/1100/3003 2) Temper: O, H12, H14, H16, H18, H22, H24, H26, H32 3) Thickness: 0.50-8.00mm 4) Diameter: 100-1000mm 5) Dimensions can be produced according to clients' specifications 6) Good plasticity, conductivity 7) Generally used in
3003 / 1050 / 1060 Aluminium Discs Circles With Bright Surface Deep Drawing
3003 / 1050 / 1060 Aluminum Circle Sheet / Round Piece For Cookware / Traffic Sign Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Aluminium circle 1. bright surface, no scratch 2. Deep drawing 3. Customized packing ways are welcomed 4. High quality Aluminium circle: 1) Alloy: 1050/1060/1070/1100/3003 2) Temper: O, H12, H14, H16, H18, H22, H24, H26, H32 3) Thickness: 0.50-8.00mm 4) Diameter: 100-1000mm 5)
Cooking Utensils Aluminium Sheet Circle / Aluminum Wafer / Aluminium Disks 3003
3003 / 1050 / 1060 Aluminum Circle Sheet / Round Piece For Cooking Utensils Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Specifications: Alloy: 1050, 1060, 1100, 3003 Temper: O-H112 Thickness: 0.5-8.0mm Diameter: 100-1000mm Surface Treatment: Mill Finish MOQ: 5MT per Size Leadtime: 15-30 Days Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Chemical Composition (WT. %) ALLOY
Spinning Non - stick Cookware Aluminum Circle For Traffic Sign / Kitchens
3003 / 3105 / 3005 Aluminum Disc Circle / Round Piece For Cookware / Traffic Sign / Kitchens Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. 3003 Aluminum Circle Specification Product 3003 aluminum circle Alloy 3003,3004,3005,3105 Temper H12,H18,H14,H16,H22,H24,H26 Thickness 0.5-8.0mm Diameter 100-1000mm Color Silver, or as per customer’s requirement Application The product is widely used in Reflector, Traffic sign
Waterproof Silver Aluminum Circle / Aluminium Round Thickness 0.5 - 8.0mm
3003 Aluminum Disc Circle / Round Piece For Cookware / Traffic Sign / Kitchens Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. 3003 Aluminum Circle Specification Product 3003 aluminum circle Alloy 3003,3004,3005,3105 Temper H12,H18,H14,H16,H22,H24,H26 Thickness 0.5-8.0mm Diameter 100-1000mm Color Silver, or as per customer’s requirement Application The product is widely used in Reflector, Traffic sign. Deeply
Traffic Sign Aluminium Discs Hot Rolled / Cold Rolled With Smooth Surface
1050 / 3003 Aluminum Disc Circle / Round Piece For Cookware / Traffic Sign Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Available aluminium alloy 1000 series e.g. 1050, 1060, 1070, 1100, etc. 3000 series e.g. 3003, 3004, 3105, 3A21 etc. Thickness range 0.5-8.0mm Width range 100-1000mm Temper O, H12, H22, H14, H24, H16, H26, etc. Hot rolled and cold rolled both available Surface: Bright silver, mill finished
Mill Finish Polished Aluminium Circle , High Moisture Aluminum Round Sheet
1050 Aluminum Circle / Round Piece / Aluminum Discs For Cookware / Traffic Sign Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Product Description: Alloy:1050, 1060, 1100, 3003 Temper:O-H112 Thickness:0.5-8.0mm Diameter:100-1000mm Tolerance of Thickness:±0.05mm Tolerance of Diammeter:-0.05~+0.10mm Surface Treatment:Mill Finish MOQ:5MT per Size Leadtime:15-30 Days Payment Terms:30% by TT in advance as deposit and
Alloy 1100 Hot Rolling Aluminum Circle / Aluminum Discs Anodized Hydrophilic
1050 / 1100 / 3003 Hot Rolling Aluminum Circle / Round Piece / Aluminum Discs Aluminum circle is also called aluminum discs,aluminum stamping,aluminum round and aluminum blank circle etc. Product Description: Alloy: 1050, 1060, 1100, 3003 Temper O-H112 Thickness 0.5-8.0mm Diameter 100-1000mm Tolerance of Thickness ±0.05mm Tolerance of Diammeter -0.05~+0.10mm Surface Treatment Mill Finish MOQ 5MT per Size Leadtime 15-30 Days Payment Terms 30% by TT in advance as deposit and 70
Hot Rolled Aluminium Circle Round Piece For Non Stick Pan O - H112 Temper
1050 / 1100 / 3003 Hot Rolling Aluminum Circle Round Piece For Non Stick Pan Product Description: Alloy: 1050, 1060, 1100, 3003 Temper O-H112 Thickness 0.5-8.0mm Diameter 100-1000mm Tolerance of Thickness ±0.05mm Tolerance of Diammeter -0.05~+0.10mm Surface Treatment Mill Finish MOQ 5MT per Size Leadtime 15-30 Days Payment Terms 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Chemical Composition (WT. %) ALLOY Min. Al Si Fe Cu Mn Mg Zn V Ti Other 1050
ISO9001 Oxidation Surface Aluminum Circle With Industrial Pure Aluminum
1050 / 1100 / 3003 Hot Rolling Aluminum Circle Round Piece For Cooking Utensils Product Description: Alloy: 1050, 1060, 1100, 3003 Temper O-H112 Thickness 0.5-8.0mm Diameter 100-1000mm Tolerance of Thickness ±0.05mm Tolerance of Diammeter -0.05~+0.10mm Surface Treatment Mill Finish MOQ 5MT per Size Leadtime 15-30 Days Payment Terms 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Chemical Composition (WT. %) ALLOY Min. Al Si Fe Cu Mn Mg Zn V Ti Other
Alloy 3003 H26 Temper Aluminum Coil Colour Coated Red PVDF For ACP 60 - 100MPa
Alloy 3003 H26 Temper Aluminium Coil Coated With Coluor Red , PVDF For ACP Our chemical composition: Alloy Si Fe Cu Mn Mg Zn Cr Ti code 8011 0.5-0.9 0.6-1.0 0.1 0.2 0.05 0.1 0.05 0.08 1 3003 0.6 0.7 0.05-0.2 1.0-1.5 － 0.1 － － 2 5052 0.25 0.4 0.1 0.1 2.2-2.8 0.1 0.15-0.35 － 3 1060 0.25 0.35 0.05 0.03 0.03 0.05 － － 4 1145 Si+Fe:0.55 0.05 0.05 0.05 － － 0.03 5 3A21 0.6 0.7 0.2 1.0-1.6 0.05 0.1 － 0.15 6 Our mechanical property: Alloy Code temper Tensile Strength Rm(MPa) Yield
1050 / 1100 / 3003 Hot Rolling Aluminum Circle Round Piece For Cooking Industry
1050 / 1100 / 3003 Hot Rolling Aluminum Circle Round Piece For Cooking Industry Product Description: 1. Alloy: 1050, 1060, 1100, 3003 2. Temper: O-H112 3. Thickness: 0.5-8.0mm 4. Diameter: 100-1000mm 5. Tolerance of Thickness:±0.05mm 6. Tolerance of Diammeter:-0.05~+0.10mm 7. Surface Treatment: Mill Finish 8. MOQ: 5MT per Size 9. Leadtime: 15-30 Days 10. Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight. Chemical Composition (WT. %) ALLOY
